Calibrating Your Structure Sensor

1. Download Structure Sensor Calibrator which can be found here.

Make sure that your sensor is fully charged and that it is unplugged before launching the app.

2. Plug in Structure Sensor

When prompted plug in the structure sensor.

3. Wait for Sensor to initialize

This may take a few minutes with Structure Sensor 3.

4. Start Calibrating

You can click the "Watch Tutorial" to watch a video on how to calibrate.

When you are ready click the "Start Standard Calibration" Button.

5. Calibration Instructions

Ensure that you are scanning a flat complex pattern. A computer screen is not ideal. Something like a chess board should be enough.

6. Calibration Issues

The light might not be good enough for the scanner or the pattern while complex might not be the best for the scanner. As previously mentioned, a chess board is helpful and repeating patterns that are black and white are best.

7. Finish Calibrating

Follow on-screen instructions. It may take a few moments to calibrate when the scene quality is good. Slowly move the sensor around until the sensor moves on to the next step.

8. Calibration Tutorial

If this is your first time calibrating the sensor it would be good to do the calibration tutorial check, otherwise you can skip it.

9. Check Calibration

You can check the calibration with different objects; it does not have to be the item that you calibrated with. If the calibration seems off, move it over and sync up the 3D overlay with the item on screen.

10. Save Calibration

Once the item and the overlay match and look complete click the save calibration button.

11. Calibration Complete

Your Scanner is now calibrated.