Shapeshift3D Design Engine - Semi-Auto Insole Design & Ordering

Here we will walk through the process of ordering custom insole products from the dashboard and demonstrating the manual design steps inside the Shapshift3D Toolbox.

This video demonstrates the E2E order and design process with our TK3D Medical Insole

For more information regarding product variant options selected during the order process, please see below chart:

Name	Accepted Values	Description
Side	Dropdown menu with options: Left, Right	Foot side of the input scan
Metatarsal Pad	Dropdown menu with options: 0 inch, 1/16 inch, 1/8 inch, 1/4 inch	Thickness of the metatarsal pad. A value of 0 inch will lead to no metatarsal pad.
ML Metatarsal Pad Positioning	Dropdown menu with options: 2nd Meta, 3rd Meta, 4th Meta	Centres the metatarsal pad on the selected metatarsal head.
AP Metatarsal Pad Positioning	Dropdown menu with options: Proximal, Distal	Places the full metatarsal pad behind the sulcus, or slightly intersects it.
Medial Arch Support(%)	Dropdown menu with options: -10%, -5%, 0%, 5%, 10%	Lowers or raises the medial arch of the insole of the given percentage of the scan arch height.
Forefoot Posting	Dropdown menu with options: None, Extrinsic, Intrinsic	Type of posting that will be applied to the forefoot.
Forefoot Posting Side	Dropdown menu with options: Medial, Lateral	Side of the forefoot which that will be raised by the posting.
Forefoot Posting Angle	Any positive number, including 0.	Angle by which the forefoot should be rotated.
Rearfoot Posting	Dropdown menu with options: None, Extrinsic, Intrinsic	Type of posting that will be applied to the heel.
Rearfoot Posting Side	Dropdown menu with options: Medial, Lateral	Side of the heel that will be raised by the posting.
Rearfoot Posting Angle	Any positive number, including 0	Angle by which the heel should be rotated.
Heel Lift [mm]	Any positive number, starting at 1 mm.	Lifts heel from ground by the given value.
InsoleThickness	Dropdown menu with options: 2 mm, 3 mm, 4 mm, 5 mm	Thickness of output insole.
MedialArchThickness	Dropdown menu with options: -1 mm, -0.5 mm, 0 mm, +0.5 mm, +1 mm	Thickness different between the medial arch section of the insole, and the other sections of the insole. A positive value will lead to increased thickness, and therefore rigidity under the medial arch.
Heel Cup Height Value	Any value between 10 and 25	Height of the insole behind the heel.
Medial flange	Dropdown menu with options: None, Small - 1/16 inch, Medium - 1/8 inch, Large - 1/4 inch	Height of the medial flange.
Lateral flange	Dropdown menu with options: None, Small - 1/16 inch, Medium - 1/8 inch, Large - 1/4 inch	Height of the lateral flange.
Metatarsal bar	Dropdown menu with options: None, 1/16 inch, 1/8 inch, 1/4 inch	Thickness of the metatarsal bar.
Add fascia groove	Boolean (on or off)	Adds a fascia groove to the insole.
Morton’s Extension	Dropdown menu with options: None, Sulcus, Reverse Sulcus	Morton’s extension type to add to the insole.
Heel Cutout	Boolean (on or off)	Adds a heel cutout to the insole.
Cutout position	Dropdown menu with options: Medial, Center, Lateral	Centres the cutout to the middle or slightly to the side.